[Elecraft] Setup Help

[Dick Dievendorff]

You might set up a command memory or two and use a PF button or two to
adjust the power level between 25 and 100 watts.

73 de Dick, K6KR

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Richard Thorpe
Sent: Monday, March 10, 2014 9:41 AM
To: Elecraft List
Subject: [Elecraft] Setup Help

I have my K3 driving an Expert Amp. I set the K3 (with the ATU out) at 25W
on each band to drive the Expert to full output. A lot of times I don't want
to turn on the amp and use the K3 "barefoot" at 100W with the ATU switched
in. What is the simplest way to do this? I need to change the K3 power out
for each band, switch the antenna, switch in the ATU. Is there some simple
way to do this? Any suggestions would be appreciated.

K6CG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html