[Elecraft] Fwd: K3 - No Power Out

[Jim Miller]

I think I would reload ucode from a recent backup.  73, Jim KG0KP

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Richard Thorne
Sent: Sunday, January 26, 2014 8:35 AM
To: Oliver Dröse; elecraft at mailman.qth.net
Subject: Re: [Elecraft] Fwd: K3 - No Power Out

Next on my list to try.

Thanks

Rich - N5ZC

On 1/26/2014 8:25 AM, Oliver Dröse wrote:
>
> Have you tried restoring your config file, Rich?
>
> 73, Olli - DH8BQA
>
>
>
> Am 26.01.2014 15:15, schrieb Richard Thorne:
>> An update to my problem.
>>
>> I've pulled the KPA3 100 watt module (and turned it off in the 
>> configuration menu) hoping I would have a qrp rig when I was done, 
>> unfortunately I don't.
>>
>> I can adjust the power (while Not transmitting) and set it to say 
>> 12w.  As soon as I transmit the rig display's 0 watts
>>
>> It appears that I may have a problem that requires the K3 to take a 
>> trip to California.  I'll call Elecraft tomorrow.
>>
>> Rich - N5ZC
>>
>>
>>
>>
>> -------- Original Message --------
>> Subject:     [Elecraft] K3 - No Power Out
>> Date:     Sat, 25 Jan 2014 20:26:33 -0600
>> From:     Richard Thorne <rthorne at rthorne.net>
>> To:     Elecraft Reflector <elecraft at mailman.qth.net>
>>
>>
>>
>> I was working stations on and off today.
>>
>> Came back into the shack this evening and tried to work a VK on 15m 
>> and I had no output power.
>>
>> I turned the power dial and it was at 0 watts, no problem just turn 
>> it up.  Normally I would progress a 1/10 of a watt at a time up to 12 
>> watts then it would increase at 1 watt intervals.  This time it 
>> started at 0 and incremented at 1 watt intervals immediately, strange.
>>
>> After setting the output to 100 watts and then depressing the 
>> transmit button for a second it would transmit at 0 watts as 
>> displayed in the vfo b and vfo A would display --.
>>
>> I've disconnected the external devices to the acc connection 
>> (microham mkII in this case along with a KAT500)  as well as the 
>> rs-232 connection to be sure an outside source was not controlling the
rig.
>>
>> I have the KPA3 installed and the rig has been back to Elecraft to 
>> have the gold pins installed.
>>
>> Any ideas?
>>
>> Thanks
>>
>> Rich - N5ZC
>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html