[Elecraft] Station Monitor

[Gary Gregory]

Two years and still counting....
Gary
On 18/01/2014 9:02 AM, "kc2vmp" <kc2vmp at gmail.com> wrote:

> I've been hoping to see the port on the back of the P3 labeled sensor used
> for something like this.
>
> 73,
> kc2vmp
>
> On Jan 17, 2014, at 2:18 PM, Al Lorona <alorona at sbcglobal.net> wrote:
>
> > Wouldn't it be cool if the P3 could display the K3's transmitted signal
> in the time domain, like an oscilloscope? If this were possible then it
> might be used to obtain the classic two-tone display in the ARRL Handbook
> or maybe even the classic trapezoid pattern if somehow the necessary
> synchronization could be achieved.
> >
> > Al Bloom is going, "Oh, no," right now.
> >
> > Al  W6LX
> >
> >
> >>> I have been considering a "station monitor" to monitor my RF output.
> >>>  I have a 70MHz occilliscope that I would like to place between amp &
> >>> feed line to various antennas.  I want to make sure my CW & SSB
> >>> output is clean without clicks or splatter, especially at higher
> output.
> >
> >>> 73 Mike DeLong KD8RQE
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>