[Elecraft] K3: "XMIT" produces Display "0 W" suddenly

[John Sweeney]

Bob,

You say in CW,  did you mean to say Data A mode on the K3, which is what you need for JT65.

Zero output would be what you get if in CW mode and ptt on, with an audio input type data mode.

Just a thought

73. John. N3WT

> On Jan 17, 2014, at 11:48 AM, Bob KD7YZ <KD7YZ at denstarfarm.us> wrote:
> 
> Earlier this morning I was operating JT65 with no problems.
> Left the rig alone; worked on other computer; left the house for a while
> and when I returned, I tried to transmit using JT65; using CW and
> pressing the front=panel "XMIT".
> 
> In all cases the main Display of the K3 shows "0 W".
> 
> Checking CONFIG: Tune PWR shows 30.
> Adjusting the K3 front-panel knob "PWR" is what I'd expect, variable to
> whatever I turn it to.
> 
> What the heck happened while I was away?
> 
> 
> -- 
> 
> Bob KD7YZ
> http://www.qrz.com/db/KD7YZ
> www.denstarfarm.us/LGD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html