[Elecraft] P3 bug

Joe Subich, W4TV lists at subich.com
Mon Dec 29 15:58:37 EST 2014


> It only happens here when the logging program (N1MM+) is active,
> which suggests it is related to traffic on the RS232 link - perhaps
> some kind of data collision which is being resolved by timeouts.

N1MM Logger (both Classic and Plus) is extremely aggressive in its
polling - something like 7 or 9 "GET" items - including FA; FB; and IF;
all at once every 300 ms. Add a second polling source - e.g. the P3 -
and the chance of collision, timeout, and/or buffer overflow gets
fairly substantial rather quickly.

73,

   ... Joe, W4TV


On 2014-12-29 3:32 PM, Ian White wrote:
>
>> On Mon,12/29/2014 7:35 AM, Joe Subich, W4TV wrote:
>>> I have never seen this but I don't have the SVGA.
>>
>> Nor have I. Perhaps an RF issue?
>>
>> 73, Jim K9YC
>
> I have the same problem and it does occur in TEST mode so it isn't RF.
> It is also a problem of long standing, not related to any recent
> firmware upgrade.
>
> The displays (both P3 and SVGA) hang at very irregular intervals, on
> average about once in maybe 10-20-30 returns to TX. Sometimes the
> displays freeze for only about a second, but sometimes for as long as 10
> seconds or even more. I also have the impression that the problem
> sometimes occurs in 'streaks' when the probability seems much higher.
>
> Unfortunately the problem cannot be created on demand, only by repeated
> TX-RX cycling, but it does not seem to happen at all with purely manual
> keying.
>
> It only happens here when the logging program (N1MM+) is active, which
> suggests it is related to traffic on the RS232 link - perhaps some kind
> of data collision which is being resolved by timeouts. I have the
> impression that the displays become more likely to hang when the VFOB
> knob is rotated while transmitting on VFO A, which will feed a backlog
> of data into the RS232 link or its buffers.  (FYI, my RS232 link uses
> the hardware COM1 port on the PC motherboard and the PC-P3-K3 chaining
> is exactly as specified in the manuals; the whole link functions
> perfectly in every other respect.)
>
> Although the problem seems to require that the logging program is
> running, it does not seem to be directly related to the source of CW
> and/or PTT. The problem occurs with manual keying and VOX, just as often
> as it does with keying from N1MM+ (DTR=CW, RTS=PTT).
>
> The same problem also occurs on RTTY but I'm not sure about SSB.
>
>
> 73 from Ian GM3SEK
>
>
>> -----Original Message-----
>> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
>> Jim Brown
>> Sent: 29 December 2014 17:09
>> To: elecraft at mailman.qth.net
>> Subject: Re: [Elecraft] P3 bug
>>
>> On Mon,12/29/2014 7:35 AM, Joe Subich, W4TV wrote:
>>> I have never seen this but I don't have the SVGA.
>>
>> Nor have I. Perhaps an RF issue?
>>
>> 73, Jim K9YC
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to gm3sek at ifwtech.co.uk
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>


More information about the Elecraft mailing list