[Elecraft] fldigi and K3 frequency readout

[Don Wilhelm]

Bill,

I don't think there is an Elecraft fix for that.  Other digital 
applications get it correct while others do not.  Some are not even 
aware that the K3 has a DATA mode with sub-modes and force USB or LSB.

It is not likely an Fldigi problem - because Fldigi uses other 
applications (e.g. Hamlib or RigCat) for transceiver control.
My guess is that the problem may be with how the DXLab bridge handles 
the K3 frequency and offsets when in DATA mode.

73,
Don W3FPR

On 12/16/2014 12:39 AM, Bill Turner wrote:
> Just learning how to use fldigi with my K3.  Got everything working,
> almost. I'm using fldigi with the bridge to DXLab.
>
> As long as I have the K3 in USB mode, the frequency readout in fldigi
> is correct, both the dial freq and the dial+audio freq.  But when I
> change the K3 to data-a mode, the dial+audio readout is wrong, showing
> only the dial freq.  Also, if I have the K3 in data-a mode and I
> change modes in fldigi, the K3 goes back to USB.
>
> I could just leave the K3 in USB mode all the time, but that means
> changing the mic input back and forth from line in each time I change
> modes.
>
> I hope I made that clear. Is there a fix for this?
>
>