[Elecraft] P3 Ubdate

[Wes (N7WS)]

I'm positive that I had everything set as desired.  I thought my original post 
said as much.

The Lock function survives everything, even band changes, which I find curious.  
Perhaps there is a need for it other than how I use it, which is to lock the A 
VFO when I use split.  Since I have no second receiver,  but do have an SDR-IQ 
bandscope I often use the REV button and the main tuning knob to set my TX 
frequency to the last calling station's frequency.  A slip on the REV button 
while doing this will move the A VFO rather than the B, so locking A prevents 
this. It would be helpful (and to me, logical) to have a memory recall or band 
change unlock the VFO.

The RX Ant state is not memorized.  This is easy to see.  Turn on the RX antenna 
and recall any M1-M4 memory.  It will stay on.

Wes  N7WS

On 12/11/2014 4:09 PM, Don Wilhelm wrote:
> Wes,
>
> Are you certain you had all the desired parameters set in the K3 when you 
> stored the M1-M4 per band memories?  I find that they do save the mode, 
> frequencies, filter settings and antenna selection that you have requested.
> I don't know about your Split Macro and the LOCK functions or the RX antenna 
> because I have not tried those in my setup.
>