[Elecraft] K3 No Transmit When WAV File Is Played

[Don Wilhelm]

Bud,

Are you using a microphone connected to the computer - so the same audio 
path is used for the microphone and the WAV file output?

If you prefer a microphone connected directly to the K3, then you will 
have to set the K3 to MIC+LINE and plug the soundcard output to the K3 
Line In jack.
Adjust the soundcard output to adequately drive the K3 ALC meter (you 
can do that in TX TEST so no signal is transmitted).  Drive the ALC 
meter to the same level as you get from the microphone - it should be 5 
to 7 bars.

73,
Don W3FPR

On 12/11/2014 4:42 PM, Bud Governale wrote:
> When I hit a function key in N1MM the correct wav file plays as heard thru the computer speakers.
>
> However the K3 (in SSB mode) does not transmit.
>
> Any suggestions?
>
>