[Elecraft] KX3 2m module problem: missing band map for 144

[John K7JLT]

I had a similar problem and found after I went through the configuration step one-by-one and crossed them off as I completed each step. Found that I was skipping the same step, worked correctly the last time. 
 
John K7JLT

Louis Brown <rfengr at everestkc.net> wrote:

>I installed the 2m module per the instruction revision A3.  When I go to configure the BND MAP I’m not getting a choice for 144; it is missing when I cycle through with BAND+ or BAND-.
>
>I verified the following settings:
>
>2M/4M = nor
>FW_REVS = 2.12
>
>I reset the EEPROM to default values but that does not fix it.
>I’m getting power to the 2m module.
>
>Any idea what’s wrong?
>
>Thanks,
>Lou
>KD4HSO
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k7jltextra at gmail.com