[Elecraft] Disabling the ANT2 selection

[Tom H Childers]

If you only have the switch connected to Antenna One, and no other
antennae, why would you ever push the antenna button?  

The front panel of the K3 displays the selected antenna just below
the first digit of the main VFO, indicating which antenna output is
selected, making it easy to determine which antenna output has been
selected.

Having said that, the dummy load solution will work and provide a
method of having the dummy load available for testing.

73,
Tom
Amateur Radio Operator N5GE
Licensed since 1976
ARRL Lifetime Member
QCWA Lifetime Member 

On Wed, 11 Sep 2013 11:03:14 -0400, "Doug Ellmore Sr."
<doug at ellmore.net> wrote:

>Is there a way I can disable the ANT2 selection on the K3 so it does not go
>to ANT2 when I push the ANT button?
>
>I am using a remote ant switch and don't want to make a mistake of pushing
>the ANT button and then transmit.
>
>I was receiving some strong signals this morning even when the ANT2 was
>selected with no antenna connected.
>
>I guess I could put a dummy load there in case I do a dumb thing...