[Elecraft] Elecraft Digest, Vol 114, Issue 32
Carl Hunt Hays III
Carl at W1ABO.com
Tue Oct 22 12:08:57 EDT 2013
On Oct 22, 2013, at 12:00 PM, elecraft-request at mailman.qth.net wrote:
> Send Elecraft mailing list submissions to
> elecraft at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> elecraft-request at mailman.qth.net
>
> You can reach the person managing the list at
> elecraft-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
> 1. Re: XG3 set up (Paul Saffren N6HZ)
> 2. Re: CW Pitch Resolution (CR)
> 3. Re: kx3 internal batteries question (Greg Troxel)
> 4. Proset-K2 For Sale (John Scott)
> 5. Re: KX3 turn on Dual RX in menu (John Buck)
> 6. FS: Mint KX3 (Steve S)
> 7. Re: KPA100 problem with SWR bridge - High SWR (Stan AE7UT)
> 8. Re: KX3 turn on Dual RX in menu (Peter Eijlander (PA0PJE))
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 21 Oct 2013 09:32:12 -0700 (PDT)
> From: Paul Saffren N6HZ <pauls at elecraft.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] XG3 set up
> Message-ID: <1382373132131-7580061.post at n2.nabble.com>
> Content-Type: text/plain; charset=us-ascii
>
> Hi David,
>
> One thing to check that is fairly common is the 3.5mm serial jack which
> plugs into the top of the XG3. Just make sure that it's fully inserted into
> the top.
>
> If you're still having trouble, please contact Elecraft support for
> additional help.
>
> 73,
>
> Paul
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/XG3-set-up-tp7579992p7580061.html
> Sent from the Elecraft mailing list archive at Nabble.com.
>
>
> ------------------------------
>
> Message: 2
> Date: Mon, 21 Oct 2013 12:41:00 -0400
> From: CR <ka5s at earthlink.net>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] CW Pitch Resolution
> Message-ID: <5265591C.5000707 at earthlink.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> The KWM-2 was IIRC 1500 Hz -- and my FPM-300 was 1750. *That* was too much, and inspired a relay-switched front -panel RIT control. The design reason was sound (no pun intended, for once) enough; the transmit IF filter had to suppress harmonics of the keyed tone for a pure signal. This is something that might help some digital-soundcard ops.
>
> Also once upon a time -- so I recall -- some legal [half] wit at the FCC decreed that tone-generated CW on the KWM-2 was "A2" and NOT lawful in the CW segments.
>
> Today it's "images sent in data mode are SSTV." Give 'em an inch and they think they're a ruler.
>
> Cortland
> KA5S
>
> ---------------------------------------------------------
>
> From: "Ron D'Eau Claire" <ron at cobi.biz>
>
>
> I'm just happy that the 1 kHz sidetone that was almost "standard" for many
> years is no longer popular. All of my radio licensing CW tests at the FCC
> offices used 1 kHz. That made my brain ache,
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 20 Oct 2013 08:28:40 -0400
> From: Greg Troxel <gdt at lexort.com>
> To: "Richard Gagnon" <Richard at gagnonconsulting.com>
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] kx3 internal batteries question
> Message-ID: <smua9i45don.fsf at linuxpal.mit.edu>
> Content-Type: text/plain
>
> I then removed all 8 batteries and checked their voltage (no load, just
> with an old Simpson VOM) and 4 batteries measured 1.2 V and the other 4
> were at 0.0 V. I am not sure why they would be different, nor do I
> understand the BATT ERROR message.
>
> [Others have explained BATT ERROR.]
>
> It sounds like 4 of the batteries are weak and/or failed relative to the
> other 4. Are they really the same kind and age?
>
> I usually advise against buying batteries that are 1) not
> ultra-low-discharge or 2) other than Maha/PowerEx or Sanyo.
>
> First, label the 8 batteries with something that won't rub off. Also
> label your new 8 batteries. Log the as-found voltages, and all of the
> following data.
>
> Eventually you will have weak/bad cells, and it's really hard to know
> what's going on if they aren't labeled. With a set of 8, you will need
> to get 8 new ones when you have one failure, but you will likely have a
> number of cells that can be used in pairs. (I got 8 Maha Imedions in
> 2009, and have been using them nearly daily to power a handheld GPS
> receiver. 6 are working fine, and 2 have failed, which seems ok given
> their usage.)
>
>
>
> When your C9000 arrives (that spares me from advising that you get one :-),
> do a REFRESH-ANALYZE cycle on each battery. I use 1000 mA charge, 200
> mA discharge, as a standard load over multiple devices. After you've
> done all 8, do them again. If some are weak (not 100 mA less, but like
> 700 mAh vs 2400 mAh), they are bad and should be recycled.
>
> Also do refresh-analyze on the new batteries, 2 cycles. Probably they
> will stabilize in capacity on the 2nd cycle, with values not that
> different than the first. Keep this data so you can do it again every
> year.
>
> Feel free to send me the data offlist for interpretation.
>
> My extended battery ranting is at
> http://www.lexort.com/blog/12v.html
>
> 73 de n1dam
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 21 Oct 2013 16:57:06 -0300
> From: John Scott <scotts at sandycove-ns.ca>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Proset-K2 For Sale
> Message-ID: <52658712.4000205 at sandycove-ns.ca>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Let's try this a third time to get it right.....text only!
>
> Heil/Elecraft Proset K2 for sale.
>
> Virtually new, used very little. Includes adapter or K2/K3, manualand
> original boxand shipping carton.
>
> $165.00 delivered by USPS/Canada Post anywhere in Canada or the lower 48.
>
> PayPal only. Please reply off list.
>
> John VE1JS
>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 21 Oct 2013 12:00:46 -1000
> From: John Buck <kh7t at arrl.net>
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX3 turn on Dual RX in menu
> Message-ID: <5265A40E.2040004 at arrl.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Thank you Don for your courteous and detailed reply.
> My problem turned out to be that RX SHFT was on.
>
> I was getting unexpected results when I performed the procedure
> according to the manual. I failed to recognize the RX SHFT response as
> an error code. After I duplicated your suggestion (as per the book), I
> knew I was doing it properly and was still missing something. I finally
> realized that I had the RX SHFT parameter enabled on this band. Of
> course, the book states that Dual RX and RX SHFT are incompatible and
> the SHFT must be off. Corrected that and all is well. Brain lapse
> corrected.
>
> To those who could not resist RTFM type comments, I can only say that as
> a long time early adopter of Elecraft I am fully aware of the necessity
> to read the manual fully. I have done so several times. On the day I
> sent my frustrated request for help, I had spent another two hours with
> the manual and KX3 and continually misinterpreted the error message. I
> was disappointed with the fact that I received several RTFM type
> comments without any useful information pointing to the real error that
> I knew I must be making repeatedly.
>
> Recognizing how these RTFM comments made me feel makes me very glad that
> I have refrained numerous times from making such comments when I thought
> it probably was appropriate.
>
> Again Don, I thank you for your ever courteous and accurate responses to
> those of us who sometimes go down the wrong path and miss the obvious
> even after reading the manual numerous times.
>
> Aloha,
> John KH7T kits:
> K3 #125, P3 #159 P3SVGA, KPA500 #180, KAT500 #308,
> KX3 #659 - OK I was a little slow to adopt the KAT500 and KX3.
> There were also a K2/100 and a KX1 moved on to new happy users.
>
> On 10/19/2013 2:53 AM, Don Wilhelm wrote:
>> John,
>>
>> Like all other menu changes, bring up the menu and dial to DUAL RX
>> with VFO B knob. Then turn the VFO A knob to change the parameter.
>> Exit the menu.
>>
>> 73,
>> Don W3FPR
>>
>> On 10/18/2013 11:58 PM, John Buck wrote:
>>> I went to MENU. DUAL RX is OFF.
>>> Both a and b vfo are within 10 kc on 40 M SSB
>>>
>>> How to I change OFF to AUTO? I have never tried this before. Manual
>>> just says do it.
>>> snip
>>> I need the magic switch?
>>>
>>
>>
>>
>
>
>
> ------------------------------
>
> Message: 6
> Date: Mon, 21 Oct 2013 23:01:14 -0400
> From: Steve S <ny3a at hotmail.com>
> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: [Elecraft] FS: Mint KX3
> Message-ID: <SNT146-W7894AFCF50B7102B770B028A020 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Mint KX3 with original factory boxes and packing. Original manual. Purchased new from Elecraft 12/2012.
> KX3-F (factory assembled) SN3072KX3RET-FKX3FL3-F filterKX3-PCKT accessory cable kitKXUSB
> $900 plus shipping
> 73;SteveNY3Any3a at hotmail.com
>
> ------------------------------
>
> Message: 7
> Date: Tue, 22 Oct 2013 00:36:13 -0700 (PDT)
> From: Stan AE7UT <AE7UTE at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KPA100 problem with SWR bridge - High SWR
> Message-ID: <1382427373166-7580069.post at n2.nabble.com>
> Content-Type: text/plain; charset=us-ascii
>
> Thanks for all the help.
> Got it working FB and made my first contact tonight.
>
> 73
> Stan AE7UT
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KPA100-problem-with-SWR-bridge-High-SWR-tp7580050p7580069.html
> Sent from the Elecraft mailing list archive at Nabble.com.
>
>
> ------------------------------
>
> Message: 8
> Date: Tue, 22 Oct 2013 15:59:21 +0200
> From: "Peter Eijlander (PA0PJE)" <pa0pje at xs4all.nl>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KX3 turn on Dual RX in menu
> Message-ID: <526684B9.4090004 at xs4all.nl>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi John,
> I second that!
> Don't we all know how it feels to miss that one line in a manual and
> then being directed the right way?
>
> Cheers,
> Peter PA0PJE
>
> John Buck schreef:
>> Again Don, I thank you for your ever courteous and accurate responses to
>> those of us who sometimes go down the wrong path and miss the obvious
>> even after reading the manual numerous times.
>>
>> Aloha,
>> John KH7T
>
>
> ------------------------------
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/elecraft
> You must be a subscriber to post.
> Elecraft web page: http://www.elecraft.com
>
> End of Elecraft Digest, Vol 114, Issue 32
> *****************************************
>
More information about the Elecraft
mailing list