[Elecraft] RTTY with K3/0

[N7IP]

Thanks Rich. I tried changing the POL parameter to zero earlier tonite 
and it seems to work (1 is the default). Afterward, I worked XR0ZR 
without any problem or complaints (altho the DXpedition is probably not 
going to comment much!). I'm going to try to work some more guys this 
weekend to see if the POL=0 solves the problem with MTTY.

Bob

On 11/15/2013 8:31 PM, Richard Ferch [via Elecraft] wrote:
> Bob,
>
> In FSK mode MMTTY's REV button doesn't change the transmit polarity.
> Transmit polarity in FSK is controlled by the radio, and the only thing
> MMTTY's REV button can do in FSK is reverse the receive polarity, which
> as you noted is the opposite to what you want.
>
> To change the transmit polarity in FSK, use the K3's CONFIG:FSK POL
> setting. I don't know for sure about your remote configuration, but when
> using MMTTY locally CONFIG:FSK POL should be set to 1.
>
> 73,
> Rich VE3KI
>
>
> N7IP wrote:
>
> > I'm new to RTTY and could use some help. I must use the K3 FSK D 
> capability
> > because I am remote with the K3/0. With MTTY software, I can copy 
> guys fine
> > in NORMAL (not REV) mode. But the other guy sees me as either on the 
> wrong
> > sideband (I'm set for LSB) or reversed. If I hit the REV button on 
> MTTY to
> > fix that, I can't copy him. Yes, I know, it's a dumb question, but 
> what am I
> > doing wrong?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email] 
> </user/SendEmail.jtp?type=node&node=7580890&i=0>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ------------------------------------------------------------------------
> If you reply to this email, your message will be added to the 
> discussion below:
> http://elecraft.365791.n2.nabble.com/RTTY-with-K3-0-tp7580882p7580890.html 
>
> To unsubscribe from RTTY with K3/0, click here 
> <http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=7580882&code=Ym9iQG9uZWhvcnNlY3JlZWsuY29tfDc1ODA4ODJ8LTE3MTAwMTkwODk=>.
> NAML 
> <http://elecraft.365791.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml> 
>





--
View this message in context: http://elecraft.365791.n2.nabble.com/RTTY-with-K3-0-tp7580882p7580891.html
Sent from the Elecraft mailing list archive at Nabble.com.