[Elecraft] RTTY with K3/0

[Richard Ferch]

Bob,

In FSK mode MMTTY's REV button doesn't change the transmit polarity. 
Transmit polarity in FSK is controlled by the radio, and the only thing 
MMTTY's REV button can do in FSK is reverse the receive polarity, which 
as you noted is the opposite to what you want.

To change the transmit polarity in FSK, use the K3's CONFIG:FSK POL 
setting. I don't know for sure about your remote configuration, but when 
using MMTTY locally CONFIG:FSK POL should be set to 1.

73,
Rich VE3KI


N7IP wrote:

> I'm new to RTTY and could use some help. I must use the K3 FSK D capability
> because I am remote with the K3/0. With MTTY software, I can copy guys fine
> in NORMAL (not REV) mode. But the other guy sees me as either on the wrong
> sideband (I'm set for LSB) or reversed. If I hit the REV button on MTTY to
> fix that, I can't copy him. Yes, I know, it's a dumb question, but what am I
> doing wrong?