[Elecraft] K3 Com Port Question

Dick Dievendorff dick at elecraft.com
Sun Nov 10 20:19:14 EST 2013


Bill:  

There are "port sharing" programs, such as LP-Bridge, that permit multiple
programs to share the K3's single COM port. What these programs do is "stand
in" for the K3. The port sharing "owns" the K3's single serial port, and the
"port sharing" program provides "virtual" ports that your other programs
connect to.  The "port sharing" program arbitrates which program gets which
response.

But for some time (and maybe still) LP-Bridge does not permit the K3 Utility
to connect in this fashion.  The main reason is that the K3 Utility needs
sole control of the radio during some of its functions, and uses K3
capabilities that are not documented as the "K3 serial programmer's
reference".  Firmware load and RF Gain calibration are the primary functions
in this category. The K3 doesn't behave like a "programmer's reference K3"
while the firmware is being installed.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill Wiehe
Sent: Sunday, November 10, 2013 2:34 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 Com Port Question

I need some tutelage on Com Ports. The K3 and P3 both use Com Port 6 for
access to the computer. Com Port 6 is also used but the HRD/DM780/USB
Navigator and MMTTY. This is not a real problem as I do not use all these
"programs" at the same time. However, it would be nice to be able to access
the K3 Utility w/o having to shut down other programs. Being really
unfamiliar with Com Port stuff, how does one change com ports for various
drivers/programs?

I did try to change the com port by just selecting a new, unused, one for
the list in the  K3 Utility but nothing happened.

Thanks in advance for the tutelage.
73,
Bill-W0BBI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



More information about the Elecraft mailing list