[Elecraft] K3 Com Port Question

[Tony McClenny]

Bill,

You may wish to visit my website and check the "How To" section as I have
documented how I use my K3 and five different software programs all at the
same time with a single serial or USB port - the necessary software is
LP_Bridge, which is free - based on its value, I suggest once you get it
working that you send the author a "donation".  Hope this will assist you in
your quest.

- Tony, N3ME -

118 Ashwood Street
Bethany Beach, DE 19930-9699
(302) 539-5638
Grid:  FM28lm

http://www.n3me.net
Elecraft K3 # 2462
PVRC Member

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill Wiehe
Sent: Sunday, November 10, 2013 22:34 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 Com Port Question

I need some tutelage on Com Ports. The K3 and P3 both use Com Port 6 for
access to the computer. Com Port 6 is also used but the HRD/DM780/USB
Navigator and MMTTY. This is not a real problem as I do not use all these
"programs" at the same time. However, it would be nice to be able to access
the K3 Utility w/o having to shut down other programs. Being really
unfamiliar with Com Port stuff, how does one change com ports for various
drivers/programs?

I did try to change the com port by just selecting a new, unused, one for
the list in the  K3 Utility but nothing happened.

Thanks in advance for the tutelage.
73,
Bill-W0BBI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html