[Elecraft] KAT500 /K3 cable with US Interface soundcard

[Don Wilhelm]

Yes, but he apparently did not have it or did not read (or understand) 
the instructions for its use.

73,
Don W3FPR

On 11/8/2013 4:18 PM, Jim Bennett wrote:
> Isn't that the "Y" adapter that comes with the KPAK3AUX?
>
> On   Friday, Nov 8, 2013, at  Friday, 12:52 PM, Don Wilhelm wrote:
>
>> Jack,
>>
>> A "Y" adapter for DB15HD can be used at the K3 end.  Make sure it has all 15 pins wired "straight through" - A VGA "Y" will NOT do because it does not use all the pins and connects some of them together.
>>
>> I recall the proper adapter is available at Cable Wholesale (or something like that).
>>
>> 73,
>> Don W3FPR
>>
>> On 11/8/2013 3:34 PM, W4GRJ wrote:
>>> I recently ordered the KPA500 & KAT500. Looking at the connection diagram between the K3 & KAT500 there is a connection on the ACC  of the K3. My Navigator soundcard is now connected to the ACC on the K3. What is the solution to use both the KAT500 & the Navigator?
>>>
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>