[Elecraft] KAT500 /K3 cable with US Interface soundcard

[Jim Bennett]

Isn't that the "Y" adapter that comes with the KPAK3AUX?

On   Friday, Nov 8, 2013, at  Friday, 12:52 PM, Don Wilhelm wrote:

> Jack,
> 
> A "Y" adapter for DB15HD can be used at the K3 end.  Make sure it has all 15 pins wired "straight through" - A VGA "Y" will NOT do because it does not use all the pins and connects some of them together.
> 
> I recall the proper adapter is available at Cable Wholesale (or something like that).
> 
> 73,
> Don W3FPR
> 
> On 11/8/2013 3:34 PM, W4GRJ wrote:
>> I recently ordered the KPA500 & KAT500. Looking at the connection diagram between the K3 & KAT500 there is a connection on the ACC  of the K3. My Navigator soundcard is now connected to the ACC on the K3. What is the solution to use both the KAT500 & the Navigator?
>> 
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html