[Elecraft] Wider bandwidth while listening to AM SW on the KX3?

[Martin Ewing]

You get up to 48 kHz bandwidth out of the KX3 I/Q outputs, but you need to supply 
your own I/Q demodulator - like Quisk, PowerSDR, etc.

73 Martin AA6E


On 11/01/2013 05:33 PM, Don Wilhelm wrote:
> The KX3 is designed as a Ham Band receiver as the primary consideration.  It 
> includes filtering that is practical for Ham Band operation.
> Yes, it does provide full general coverage receive,  but the design parameters are 
> not primarily for SWL wideband audio response.  The general coverage aspects are a 
> nice add-on, but are not the primary focus of the KX3.
>
> 73,
> Don W3FPR
>
> On 11/1/2013 4:21 PM, Andrew Robertson wrote:
>> It’s true that, in the USA, the sidebands will be 5 KHz, at the absolute maximum, 
>> which means that I am missing at most about .8 KHz of audio at the very most. 
>> However, in the shortwave bands (above MW BCB) there are many broadcasters using 
>> 12 to even 15 KHz of spectrum these days. China, Cuba, Russia, and others have all 
>> adopted a very hi-fi sounding very wide bandwidth in the past few years.
>>
>> I use the same speakers for all my listening with different radios so it’s not 
>> likely that this is the issue.
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html