[Elecraft] Dual Signal Image on NaP3 with KX3

[Ariel Jacala]

I tried the XG3 with the biggest signal on it and I still have the mirror image.  Do I tune right to the big signal and then move away?

Ariel NY4G

Sent from my iPad

On May 31, 2013, at 11:11 PM, "Tony Estep" <esteptony at gmail.com> wrote:

> On Fri, May 31, 2013 at 9:46 PM, Ariel Jacala <ny4g at hotmail.com> wrote:
> 
>> I get a dual image on my NaP3 display....
> 
> ==============
> Ariel, sometimes NaP3's I-Q autobalancing gets discombobulated. It can be
> cured very simply by putting in a very big carrier, S9+40 or so. I have my
> XG-3 connected to the receive antenna input on the K3. When my NaP3 gets
> out of sorts (not frequent, maybe once a month) I switch over to the RX
> Ant, turn on the XG3 to the 0 dBm level, and tune the receiver to about 40
> Khz away from the signal. This fixes the display immediately.
> 
> This presumes that you do have the sound card and everything else set up
> correctly. If you do, this simple trick will wake up NaP3's autobalance,
> which will eliminate images from the display and make it perform perfectly.
> 
> Tony KT0NY
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html