[Elecraft] Dual Signal Image on NaP3 with KX3

[Tony Estep]

On Fri, May 31, 2013 at 9:46 PM, Ariel Jacala <ny4g at hotmail.com> wrote:

> I get a dual image on my NaP3 display....

==============
Ariel, sometimes NaP3's I-Q autobalancing gets discombobulated. It can be
cured very simply by putting in a very big carrier, S9+40 or so. I have my
XG-3 connected to the receive antenna input on the K3. When my NaP3 gets
out of sorts (not frequent, maybe once a month) I switch over to the RX
Ant, turn on the XG3 to the 0 dBm level, and tune the receiver to about 40
Khz away from the signal. This fixes the display immediately.

This presumes that you do have the sound card and everything else set up
correctly. If you do, this simple trick will wake up NaP3's autobalance,
which will eliminate images from the display and make it perform perfectly.

Tony KT0NY