[Elecraft] cobweb antenna

Bill Blomgren billblom at nc.rr.com
Fri May 31 17:44:17 EDT 2013


Exactly - Not sure what is going on with the "commercial" version's guy... I suspect that is a side venture, and 'real work' probably has him tied up.

It's either that, or he doesn't want to fight with exchange rates, shipping out of olde blighty, and all that stuff.  

That said.. I'm wondering if there are other baluns that might have better performance up as far as say 6 meters... <heh> - allowing a 6th band...
  ----- Original Message ----- 
  From: rckchp at comcast.net 
  To: Bill Blomgren 
  Cc: Elecraft at mailman.qth.net 
  Sent: Friday, May 31, 2013 6:54 AM
  Subject: Re: [Elecraft] cobweb antenna


  Hello Bill,



  I have no intent to denigrate the design and functionality of the "Cobweb" style antenna but.........



  Several years ago I was inclined to acquire the G3TPW commercial version of the "CobWebb" antenna, I found the website ( www.g3tpw.co.u ) and sent an email asking how to order, method of payment & shipping charges, etc. Got no response......I thought maybe there was some problem with the 1st email attempt so I sent another.....still no response. So I sent an inquiry via regular mail, including a self addressed (with postage) return envelope......no reply whatsoever.......



  So I can't comment on how well the G3TPW version functions......but in consideration of my above described experience, maybe you should limit your effort to a homebrew version.



  Also, later I had good results with the homebrew version of the Buddipole, built from free instructions on W3FF's homepage ( https://sites.google.com/site/w3ffhomepage/ ). But back then I was doing more portable ops and since the commercial version is more sturdy I decided to get one......saw one being offered on ebay so I bid and won the auction. Eventually I lost one small bit and needed a replacement part so I contacted W3FF and got very fast response....even though I hadn't purchased direct from them. 



  So I've decided customer service is just as important as functionality when deciding which products to acquire. Just my opinion...............



  Rich  K2CPE

  K2 #1102





   



------------------------------------------------------------------------------


  From: "Bill Blomgren" <billblom at nc.rr.com>
  To: Elecraft at mailman.qth.net
  Sent: Thursday, May 30, 2013 10:27:22 PM
  Subject: [Elecraft] cobweb antenna


  I'm still in the "pre-purchase" stage.. but I'm sort of thinking that the K3 
  is where I'm going to end up.. Possibly with the preamp...and then there is 
  the big problem: what to make it to the air with.....

  The idea of starting off with the buddipole system is out there - and very 
  possible...

  I've also been reading up on the plusses and minuses of many of the 
  alternatives that may be possible in an apartment life...

  One is the magnetic loop - which is a tad pricey with the vac. variable --  
  lots of copper, and the need to tune the thing every time you change 
  frequency - and not just antenna tuner stuff - as in changing the cap on the 
  antenna itself. It is a very high q (and thus voltage and current) 
  critter...Rube Golberg figured out how to do that.. motors with long screw 
  drives into a sealed box with the cap inside..with very high voltages 
  there... and thus requiring altitude for safety..

  I came across a nifty square thing called a cobweb, which is more or less 
  semi-flat over 4-5 bands... is very light..and can be made of pvc pipe or 
  possibly fiber glass because it just has 5 wires in a big square.. One 
  antenna to cover 20 17 15, 12 and 10 meters sounds interesting.. One of the 
  designs even works on 6, but has higher losses... (That may be the baluns 
  they use for a 4-1 impedance match and to go unbalanced...

  Has anyone tried one of these critters, and if so, is the Elecraft happy 
  with it?


  ______________________________________________________________
  Elecraft mailing list
  Home: http://mailman.qth.net/mailman/listinfo/elecraft
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Elecraft at mailman.qth.net

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html



More information about the Elecraft mailing list