[Elecraft] K3 and Signalink USB

[Michael Eberle]

I seem to recall having a similar problem with FLDIGI.  I think there is 
a checkbox to always use USB that I had to check to get the frequency to 
display correctly using DATA-A mode.

Mike
KI0HA

On 5/30/2013 5:27 PM, Brendon Whateley wrote:
> When I use Data-A on the KX3, FLDIGI shows the incorrect operating frequency and I don't know how to fix that.  The frequency is correct when I use the side band.
>
> - Brendon
> KK6AYI
>
> On May 30, 2013, at 2:53 PM, Greg wrote:
>
>> And always best to use Data-A for data modes via soundcard (or AFSK-A
>> for RTTY).  This will help with a clean signal by keeping compression
>> turned off to avoid over-driving the audio chain.
>>
>> 73
>> Greg
>>
>>
>> On 5/30/13, David Sanders W4DES <w4des at sandersweb.net> wrote:
>>> I'm using the SignaLink USB.  SignaLink sells various cables to hook up to
>>> different radios.  You need to get the cable part no. SLCABK3.  It plugs
>>> into the line input, line output and PTT input jacks on the back of the K3.
>>> In addition, you will reconfigure some jumper wires inside the SignaLink
>>> USB.  Instructions come with the cable.
>>> 73,
>>> David Sanders W4DES
>>> K3 (7409)
>>>
>>>
>>>
>>> On May 30, 2013, at 5:37 PM, Richard W Hemingway <rheming1 at sbcglobal.net>
>>> wrote:
>>>
>>>> Hi,
>>>>
>>>> I think that I may have messed up and it got away from me.  What I was
>>>> asking is whether any of you are using SignaLink USB. Where do the cables
>>>> plug in on the back of the K3. Do you have to turn on Data or can you use
>>>> SSB?  I have written to SignaLink but have not received an answer.  I know
>>>> that you don't have to use SL for PSK, and I may not go that way, but I
>>>> have it for the rig I just sold and Would like to use it if I can.
>>>>
>>>> Dick, N5XRD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>