[Elecraft] Utility does not copy new files

[Jay]

All

I found the problem and put out the solution about 2 hours ago....maybe it 
didn't get sent?

Jay


----- Original Message ----- 
From: "Dick Dievendorff" <dieven at comcast.net>
To: "'Jay'" <pcb4u at verizon.net>; <elecraft at mailman.qth.net>
Sent: Friday, May 24, 2013 7:47 PM
Subject: RE: [Elecraft] Utility does not copy new files


> The utility creates the "default" folder.  If you want a different folder
> than that, please create it and navigate to it and then copy firmware.
>
> Dick, K6KR
>
>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jay
> Sent: Friday, May 24, 2013 17:29 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Utility does not copy new files
>
> As I try to put all the new firmware files for the K3 on 6 PCs for an
> expedition, the new K3 Utility (latest version now loaded on each PC) says
> it copied the files from the ftp  but there is no folder created by the
> utility. I tried sending it to another folder and nothing happens but the
> utility wants to talk to the K3. So I shut off the K3 and there is no
> download and the utility once again tries to talk to the K3. So I close 
> the
> COM port, then ask for the firmware files expecting that I can download 
> the
> firmware but it looks at the ftp, does nothing, then again tries to talk 
> to
> the K3.
>
> I had a feeling the firmware was going to be an experience (first time
> download for me)..and its not making any sense.
>
> Jay
> W2IJ
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>