[Elecraft] KAT100 project - removing the control board

[Don Wilhelm]

Stan,

That is great news.
The KAT100 alignment is almost a no-brainer, just follow the manual 
instructions and you are done.  If you have trouble, it is usually with 
the T1 bi-filar wound transformer.
Obtain the null (bridge balance) first - until that is right, none of 
the other adjustments will be correct.

73,
Don W3FPR

On 5/5/2013 7:48 PM, Stan AE7UT wrote:
> As usual Don you had it spot on!
>
> The tuner started to not turn on at times when I would switch on the K2.
> I re-soldered all the pins on J3.  It now seems to function properly with
> band switching and power switching.
>
> Thanks so much.
>
> Now for alingment.  I'll let you know how it goes.
>
> 73
> Stan
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KAT100-project-removing-the-control-board-tp7573412p7573444.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>