[Elecraft] K3-100

[Dick Dievendorff]

Brian:

Slot 1: 13 kHz, not 1300 kHz.  You should enable this for receive for all
modes. This is your Tx FM filter.
Slot 2: 6 kHz, not 600 kHz. You should enable this for receive for all modes
except perhaps FM. This should be your Tx AM filter.
Slot 3. 2.7 kHz. I would enable this for receive for all modes including AM,
but not FM. This should be your Tx SSB and Tx CW filter.
Slot 5:  500 Hz: I would enable this for CW, USB, LSB, and Data, but not AM
or FM.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Brian North
Sent: Monday, March 25, 2013 5:03 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3-100

Hello, my first question on the site!

Can anyone tell me what the set-up is for configuring the filters please.

my present set-up is:

FM= 1300khz. Slot 1

AM-TX= 600khz. Slot 2

CW/SSB= 2.70khz. Slot 3

Data/Am= 0.50khz Slot 5

Are these correct, and / or what is the correct configuration please?

Many thanks in anticipation.

Brian
2E0BWQ

Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html