[Elecraft] K3-100

[Dick Dievendorff]

Hello, Brian.

Install the Elecraft K3 Utility, it's available at
http://www.elecraft.com/K3/k3_software.htm#k3util

Start the K3 Utility.

Navigate to the "Configuration" tab. Click "Configure Crystal Filters".
Click "Help" at the lower right corner. Follow the instructions in Help.  

You might also want to review the section of the K3 Owner's Manual available
at http://www.elecraft.com/K2_Manual_Download_Page.htm#K3, see page 46.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Brian North
Sent: Monday, March 25, 2013 5:03 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3-100

Hello, my first question on the site!

Can anyone tell me what the set-up is for configuring the filters please.

my present set-up is:

FM= 1300khz. Slot 1

AM-TX= 600khz. Slot 2

CW/SSB= 2.70khz. Slot 3

Data/Am= 0.50khz Slot 5

Are these correct, and / or what is the correct configuration please?

Many thanks in anticipation.

Brian
2E0BWQ

Sent from my iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html