[Elecraft] Remote KPA500 Via Moxa - On/Off Switch via S/W not stable

[Dick Dievendorff]

I've just done a little tweaking to the KPA Utility's timing.  After the
power off command is issued it takes a little while before the KPA500 is
responsive to any other serial commands.  The KPA Utility doesn't wait quite
long enough.

I'll try to get this early Beta version on to an FTP site for you to test.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of 4Z4OQ
Sent: Friday, March 22, 2013 3:22 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Remote KPA500 Via Moxa - On/Off Switch via S/W not
stable

Hi
My Set up is TS-480 via remote rig and controlling KPA500 & KAT500 via Moxa
rs232 Server port 1 38400bit/s. My issue is as follows:-

1.	I can connect to the Amplifier via KPA500 utility, can change bands,
can
switch from stby to oper but sometimes times cant change the power switch to
off mode. 
2.	In amplifier is on stby (ON) mode and by mistake close the utility
SW,
when I reopen the software the o/off status is off, but I know the amplifier
is On

Any ideas..?




--
View this message in context:
http://elecraft.365791.n2.nabble.com/Remote-KPA500-Via-Moxa-On-Off-Switch-vi
a-S-W-not-stable-tp7571721.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html