[Elecraft] Footswitch Connection on K3

[Fred Smith]

If you want one made for just what you want it for Heil has 2 modules to
choose from. I always keep a spare one of them in the shack just in case
like the time a new pup chewed the cable in half just as a contest was
starting. I pulled out the spare and used it till I repaired the other one.
They are good quality and have a key line also if needed.

73,
Fred/N0AZZ
K3 Ser #'s 6730/5299--KX3 # 2573--K2/100--KAT100
P3/SVGA--KPA500--KAT500--W2



-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Phil LaMarche
Sent: Wednesday, March 20, 2013 1:05 PM
To: 'Richard Fjeld'; pastormg2 at verizon.net; elecraft at mailman.qth.net
Subject: Re: [Elecraft] Footswitch Connection on K3

If your mike has a XLR connector, I purchased a cable from Heil and it has a
female jack for the switch. I use it with my RE27. I chose to use the hand
switch but I think he sells the foot switch as well.

Phil

Philip LaMarche

 
727-944-3226
727-510-5038 Cell
 www.w9dvm.com
WWW.FLAMGROUP.COM

K3 # 1605
KPA500 # 029
P3 #1480
KAT500  #50
K3 #1845

 CCA 98-00827
CRA 1701
W9DVM
 


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Richard Fjeld
Sent: Wednesday, March 20, 2013 1:43 PM
To: pastormg2 at verizon.net; elecraft at mailman.qth.net
Subject: Re: [Elecraft] Footswitch Connection on K3

That is what I do.  It gives me control over other things, as well. 

But, it does depend on your microphone type.  Some have contacts for the
audio built into the PTT switch on the mic.  Other mics do not have audio
contacts, only a switch for PTT. Some mics do not have a PTT switch at all.

Rich, n0ce
  ----- Original Message -----
  From: pastormg2 at verizon.net
  To: elecraft at mailman.qth.net
  Sent: Wednesday, March 20, 2013 12:29 PM
  Subject: [Elecraft] Footswitch Connection on K3


  Good Afternoon once again. I do know that the footswitch is connected to
the PTT In on the back of the K3.  But can I still have the microphone
connected in the front jack and use the footswitch to key the tranmitter and
talk through the microphone? Sorry for all the dumb questions.  Mark KB3Z
  ______________________________________________________________
  Elecraft mailing list
  Home: http://mailman.qth.net/mailman/listinfo/elecraft
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Elecraft at mailman.qth.net

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus Database: 2641/6191 - Release Date: 03/20/13


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus Database: 2641/6191 - Release Date: 03/20/13