[Elecraft] K3: Use VFO-B to select dBV

[Gary Gregory]

Have you got Menu Tech Mode ON?

Gary

On 15 March 2013 22:33, David G4DMP <david at g4dmp.fsnet.co.uk> wrote:

> I am getting dBV here, Bob, the VFO-B knob being fully clockwise.
>
> I presume you have up-to-date firmware? Mine is uC=4.61, D1/2=2.80,
> FL=1.15, DR=1.03.
>
> 73 de David G4DMP
>
> In a recent message, KD7YZ Bob <kd7yz at denstarfarm.us> writes
> >According to the Manual, Page 36, I can use VFO-B display to see dBV
> >after AFV settles down.
> >
> >I see the RMS voltage reading but I never get to see the equivalent dBV.
> >So I rotated through the variables available, by turning the VFO-B knob,
> >everything else is the but no dBV.
>
> --
>  + - - - - - - - - - - - - - - - - +
>  | David M Pratt, Kippax, Leeds.   |
>  | Website: http://www.g4dmp.co.uk |
>  + - - - - - - - - - - - - - - - - +
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
*Gary - VK1ZZ
Skype: Gary.VK1ZZ
Motorhome Portable
The Shack*
*Elecraft K3
P3 Panadapter
KPA500FT
KAT500FT**
KX3-K
*