[Elecraft] setting upper cut/lower cut via commands

[Brian Alsop]

True, but making an asymmetric filter isn't possible I think.

73 de Brian/K3KO

On 3/8/2013 13:26, Joe Subich, W4TV wrote:
>
> BW/BW$ and IS are more reliable since they are not impacted by the
> K3 meta status.
>
> 73,
>
>     ... Joe, W4TV
>
>
> On 3/8/2013 8:15 AM, Don Wilhelm wrote:
>> Brian,
>>
>> All I see is the FI and FW commands, so one must "do the math" to
>> simulate HiCut or LoCut.  Move the IF center frequency by half the
>> reduction in width.
>>
>> 73,
>> Don W3FPR
>>
>> On 3/7/2013 9:27 PM, Brian Alsop wrote:
>>> I don't seem to find any way to set upper cut and lower cut values via
>>> a macro. The programmer's manual doesn't seem to have mnemonics to do
>>> so Is it even possible?  I know one can set the bandwidth and shift.
>>> Is that what we're supposed to do?  I'd rather set the individual
>>> "cut" values independently.
>>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2240 / Virus Database: 2641/5656 - Release Date: 03/08/13
>
>



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2240 / Virus Database: 2641/5656 - Release Date: 03/08/13