[Elecraft] setting upper cut/lower cut via commands

[Don Wilhelm]

Brian,

All I see is the FI and FW commands, so one must "do the math" to 
simulate HiCut or LoCut.  Move the IF center frequency by half the 
reduction in width.

73,
Don W3FPR

On 3/7/2013 9:27 PM, Brian Alsop wrote:
> I don't seem to find any way to set upper cut and lower cut values via 
> a macro. The programmer's manual doesn't seem to have mnemonics to do 
> so Is it even possible?  I know one can set the bandwidth and shift. 
> Is that what we're supposed to do?  I'd rather set the individual 
> "cut" values independently.
>