[Elecraft] P3 and Keyboard

[Richard Fjeld]

Roger,

I would like to point out that I have been trying to encourage others to learn cw by using the keyboard to send perfectly spaced cw at set speeds.  It has memories that can be used for this as well.

Dick, n0ce

  ----- Original Message ----- 
  From: Don Wilhelm 
  To: K8RS 
  Cc: Elecraft Group 
  Sent: Saturday, June 29, 2013 3:18 PM
  Subject: Re: [Elecraft] P3 and Keyboard


  Roger,

  If you mean PSK31 and RTTY modes, that will do it.  BTW, P3 Utility is 
  not the firmware itself, but a means of downloading and installing 
  firmware updates - it runs on the computer, and is not needed once that 
  task is completed.

  If you want other data modes, you will have to run the K3 in DATA A or 
  AFSK A and use a soundcard oriented application on your computer.

  73,
  Don W3FPR

  On 6/29/2013 3:50 PM, K8RS wrote:
  > What is needed besides the K3 + P3 with the SVGA board, a USB keyboard and the latest P3 Utility firmware to run the Data modes via the P3?
  >                Roger  K8RS K3 S/N 280, P3, KPA500 and KAT500
  > ______________________________________________________________
  > Elecraft mailing list
  > Home: http://mailman.qth.net/mailman/listinfo/elecraft
  > Help: http://mailman.qth.net/mmfaq.htm
  > Post: mailto:Elecraft at mailman.qth.net
  >
  > This list hosted by: http://www.qsl.net
  > Please help support this email list: http://www.qsl.net/donate.html
  >

  ______________________________________________________________
  Elecraft mailing list
  Home: http://mailman.qth.net/mailman/listinfo/elecraft
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Elecraft at mailman.qth.net

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html