[Elecraft] P3 and Keyboard

[Don Wilhelm]

Roger,

If you mean PSK31 and RTTY modes, that will do it.  BTW, P3 Utility is 
not the firmware itself, but a means of downloading and installing 
firmware updates - it runs on the computer, and is not needed once that 
task is completed.

If you want other data modes, you will have to run the K3 in DATA A or 
AFSK A and use a soundcard oriented application on your computer.

73,
Don W3FPR

On 6/29/2013 3:50 PM, K8RS wrote:
> What is needed besides the K3 + P3 with the SVGA board, a USB keyboard and the latest P3 Utility firmware to run the Data modes via the P3?
>                Roger  K8RS K3 S/N 280, P3, KPA500 and KAT500
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>