[Elecraft] [K3] Aux RF

[Jim Miller]

Yay!

XG2 into AuxRF shows it's wired as I suspected.

Now to get the converter assembled.

More toys...

73

jim ab3cv


On Sun, Jun 16, 2013 at 6:31 PM, Jim Miller <jim at jtmiller.com> wrote:

> Hi Ron
>
> Thanks for the info. I had just discovered it as well in the KRX3 manual.
> I'll have to fire up a XGen to see which way I connected it when I
> installed it.
>
> 73
>
> jim ab3cv
>
>
> On Sun, Jun 16, 2013 at 6:15 PM, Ron D'Eau Claire <ron at cobi.biz> wrote:
>
>> That's right Jim:  You can have the subrx use ANT1 or ANT2 out of the
>> KAT3,
>> whichever is NOT being used for xmit or you can connect the AUX RF input.
>>
>> See the KRX3 Installation and Operation manual. It's available on the
>> Elecraft WEB site here:
>>
>>
>> http://www.elecraft.com/manual/KRX3_Subreceiver_Install-Operate_Manual_Rev_E
>> .pdf<http://www.elecraft.com/manual/KRX3_Subreceiver_Install-Operate_Manual_Rev_E.pdf>
>>
>> Pages 25 and 26 show the optional ways to connect the subrx antenna input
>> either to the KAT3 or to the rear-panel AUX RF input.
>>
>> Page 43 shows the MENU settings required.
>>
>> 73 Ron AC7AC
>>
>> -----Original Message-----
>> From: elecraft-bounces at mailman.qth.net
>> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jim Miller
>> Sent: Sunday, June 16, 2013 2:24 PM
>> To: Elecraft Reflector
>> Subject: [Elecraft] [K3] Aux RF
>>
>> I've got a little LF converter to play with an I thought I'd use it with
>> the
>> AUX RF input and the SUBRX.
>>
>> I've got a PR6 and beverages connected to the normal RX path and I don't
>> want to mess with that.
>>
>> I seem to remember there was a wiring election when putting in the KAT3.
>> Do
>> I remember that right? Taking one election meant not being able to use the
>> AuxRF. I could be confused...
>>
>> Just thought I'd ask before taking the K3 apart unnecessarily.
>>
>> 73
>>
>> jim ab3cv
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>>
>