[Elecraft] Troubleshooting dead subRX after adding filter

[J&J Kulp]

Didja remember remember to change the menu filter settings?   de jim    K3SW

               
On Jun 10, 2013, at 7:08 AM, Pete Smith N4ZR <n4zr at contesting.com> wrote:

> I just finished installing an 8-pole 400 hz factory filter in the subRX of my K3, and was congratulating myself on a straightforward and easy process ... until I reinstalled and tried the subRX.  It is not receiving anything at all - I can hear internally generated noise but that is it.  There is no change in the sound or level of the band noise when I switch between filters.
> 
> I've checked and rechecked the crystal filter setup, the TMP cables, etc. Before I tear it open again, is there anywhere in particular I should be looking?
> 
> 73, Pete N4ZR
> Check out the Reverse Beacon Network at
> http://reversebeacon.net,
> blog at reversebeacon.blogspot.com.
> For spots, please go to your favorite
> ARC V6 or VE7CC DX cluster node.
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html