[Elecraft] fldigi, SignaLink - problems

[David Sanders W4DES]

Try this.  Go to "Data A" mode.  Set main menu "Mic Sel" to "Line In".  Adjust the "Mic" control to set line in gain up.

David W4DES
K3 #7409





On Jun 9, 2013, at 11:46 AM, Richard W Hemingway <rheming1 at sbcglobal.net> wrote:

> Hi,
> 
> Mr K3 has arrived!!!  So far everything has gone well, except one thing. I am using a SignaLink USB, as I had one and used it on my formeer radio.  I have the new cord and jumper wire card installed. It is connected to the wire in, wire out, and PTT on the radio and into the SL, thence into the computer.  I have changed Hamlib to K3 in the configure box.  I received just fine, but when I try to send it lights up the PTT light in the Sl and the TX light on the K3, but no signal. The K3 mode is set on USB, but the same result on Data>  I know that I am doing something wrong.  Helpl!
> 
> Dick, N5XRD
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html