[Elecraft] Help with a Macro from the K3 to turn on the KAP500

[Tom]

Hi
Yes they talk to each other but only send band change info and certain other statuses. To do this with only a macro and no possible hardware is not possible

Tom 
va2fsq.com

Sent from my iPhone

On 2013-07-17, at 5:06 PM, William Levy <wglevy at gmail.com> wrote:

> Yes, but they are connected directly in the back of the K3 with one of the AUX cables so they feed each other that way.
> Thus the K3, Amp and ATU all talk to each other.
> Thus the need to be able from the K3 to turn on the Amp.
> Bill N2WL
> 
> 
> On Jul 17, 2013, at 1:02 PM, Tom wrote:
> 
>> Hi
>> That would be news to me, since the k3 and kpa use different serial ports.
>> Tom
>> va1fsq.com
>> 
>> Sent from my iPhone
>> 
>> On 2013-07-17, at 2:24 PM, William Levy <wglevy at gmail.com> wrote:
>> 
>>> Somewhere I thought there was written a short macro to designate a button
>>> on the K3 to turn on the Amp from the K3.
>>> 
>>> Any help with that would be greatly appreciated. This old ham has his fist
>>> in to too many old radios at the moment to sit down and figure out code.
>>> Too busy reading resistor codes. All  help appreciated. Thanks, Bill N2WL
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>> 
Sent from my iPhone

On 2013-07-17, at 5:06 PM, William Levy <wglevy at gmail.com> wrote:

> Yes, but they are connected directly in the back of the K3 with one of the AUX cables so they feed each other that way.
> Thus the K3, Amp and ATU all talk to each other.
> Thus the need to be able from the K3 to turn on the Amp.
> Bill N2WL
> 
> 
> On Jul 17, 2013, at 1:02 PM, Tom wrote:
> 
>> Hi
>> That would be news to me, since the k3 and kpa use different serial ports.
>> Tom
>> va1fsq.com
>> 
>> Sent from my iPhone
>> 
>> On 2013-07-17, at 2:24 PM, William Levy <wglevy at gmail.com> wrote:
>> 
>>> Somewhere I thought there was written a short macro to designate a button
>>> on the K3 to turn on the Amp from the K3.
>>> 
>>> Any help with that would be greatly appreciated. This old ham has his fist
>>> in to too many old radios at the moment to sit down and figure out code.
>>> Too busy reading resistor codes. All  help appreciated. Thanks, Bill N2WL
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>