[Elecraft] K3-Remote / RemoteRig system question
Jim Rhodes
jimk0xu at gmail.com
Wed Jul 10 19:01:05 EDT 2013
1-The K3/0 mini production date has not been announced yet. But hope it
isn't too far out.
2-There are several cables that have to be switched for the change over. I
need to get the plans for a relay box out of my head and down on paper and
built so that I can do it with software and remotely.
3-If I remember correctly there is one parameter to be changed on the
Control K3, none on the remote. I have just used software on the Control. I
also have the micro PC client that I picked up in Sweden so that all I have
at the Control is a headset, the micro (think USB sound dongle with PTT
button) and the laptop. Makes for a low profile, but the controls are
limited by what software you use.
I work away from home on a 7 on/7 off schedule and thought I would use it a
lot, but as I work 12 hour shifts I find myself mostly working or sleeping
on that week. So I haven't used it in about a year.
On Wed, Jul 10, 2013 at 10:17 AM, William Hein <bill.aa7xt at gmail.com> wrote:
> I am looking at the K3-Remote / RemoteRig system. A few questions:
>
> (1) I recall hearing something about a K3/0 with a smaller case. Was
> this just a prototype or is it headed for production? The current K3/0
> case must be mostly empty.
>
> (2) How much work is it to switch the remote (base) K3 from remote to
> local operation? I see that RemoteRig connects to the K3 serial port. I
> currently have my K3 serial port connected to a P3 and then from the P3
> serial port to a logging computer. Would these cables need to be swapped
> each time I want to change from local to remote operation? How about
> keying and mic lines?
>
> (3) How does one change the Config and Menu items on the remote K3 from
> local K0? Does the configuration 'sync' between the two rigs?
>
> 73
> Bill
>
>
> William Hein, AA7XT
> ex-AA4XT, NT1Y, AA6TT, KC6EDP
>
> Blog AA7XT.com
>
> ARRL, CSVHF & AMSAT Life Member
> UKSMG & QCWA Member
> 1st licensed 1969 - WN6NDC
>
> 1st W to OH0 6m QSO
> 1st North America to Asia 60m QSO
> Founder TopBand email reflector
>
> Tel +1 (970) 628-5120
> Email Bill.AA7XT at Gmail.com
> Loc: DM59pa
> AIM / iChat / iMessage william.hein at me.com
> Skype williamhein
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
Jim K0XU
jim at rhodesend.net
More information about the Elecraft
mailing list