[Elecraft] k3 macro command for Speaker or Phones?

[John Sweeney]

Great!   Just what I wanted.   Thank you

John N3WT.  

-----Original Message-----
From: Dick Dievendorff [mailto:dick at elecraft.com] 
Sent: Wednesday, December 18, 2013 4:33 PM
To: 'John Sweeney'; elecraft at mailman.qth.net
Subject: RE: [Elecraft] k3 macro command for Speaker or Phones?

I have PF1 set up to do this, toggle SPKR+PH on and off.

It doesn't need a macro command.

Use the K3 CONFG menu, navigate to SPKR+PH, and then hold PF1 (the RIT
button).  It says "PF1 Set". Then tap "Menu" to exit the menu.

PF1 now toggles SPKR+PH.

It takes a second or so after you HOLD PF1 for the speaker to turn off.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of John Sweeney
Sent: Wednesday, December 18, 2013 1:28 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] k3 macro command for Speaker or Phones?

Trying to set up a macro command to assign to front panel switch, to go from
speaker or phones plugged in rear,  but not able to figure the full command.
I got command which brings up the menu option, but not the rest with just
the button press.  

Please someone give me the command sequence or lead me to the right page of
the programming manual.

Thank you.
73. 
John.  N3WT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html