[Elecraft] K3 to Al-811 Amplifier

[Dick Dievendorff]

Not an AL-811, but I've used an AL-1200 with my K3. I used an RCA cable for
amplifier keying and a PL-259 jumper for RF. 

I did not connect ALC, I instead adjusted the K3's power output as
appropriate.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of pastormg2 at verizon.net
Sent: Friday, December 13, 2013 10:02 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 to Al-811 Amplifier

Hi Guys, I would like to hook up my K3 to an Ameritron Al-811 Amplifier. I
assume that I connect the K3 output to the Amplifier Input. An the Keying
Cable that is in the back to the Relay Plug on the Al-811? I see an ALC
Output and ALC Adjustment knob. But I probably don't need to use those. But
then again I could be wrong. Has anyone used the AL-811 with the K3? Thanks
in advance. Mark Griffin, KB3Z
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html