[Elecraft] KX3 Beta firmware rev. 1.44: Easier NR adjustment; DVR message play dropout fixed

[Eugene Balinski]

Thanks info..

73
Gene K1NR
K2 KX3 Future K3 owner

On Thu, 25 Apr 2013 17:42:26 -0700
 Dick Dievendorff <dieven at comcast.net> wrote:
> The latter. Each revision is complete.
> 
> 73 de Dick, K6KR
> 
> 
> On Apr 25, 2013, at 5:19 PM, "Eugene Balinski"
> <eugeneb at nni.com> wrote:
> 
> > All,
> > 
> >   Quick question regarding SW updates for the KX3.   I
> > will be starting the construction of mine in a few
> weeks
> > (already have it in the box in the shack).
> > 
> >  When I update the SW do I have to download each and
> every
> > update in order, or can I just upload the latest
> revision
> > and get all of the previous updates ?
> > 
> > Thanks es 73,
> > 
> >    Gene K1NR
> > 
> > On Thu, 25 Apr 2013 12:58:16 -0700
> > Wayne Burdick <n6kr at elecraft.com> wrote:
> >> KX3 beta firmware rev 1.44 (with DSP rev 1.16) is now
> >> available. See release notes below.
> >> 
> >> You'll need the KX3 Utility application to download
> and
> >> install firmware. For full instructions on loading
> beta
> >> releases, refer to our KX3 software page:
> >> 
> >>    http://www.elecraft.com/KX3/KX3_software.htm
> >> 
> >> Wayne
> >> N6KR
> >> 
> >> * * *
> >> 
> >> MCU 1.44 / DSP 1.16, 4-24-2013
> >> 
> >> * NOISE REDUCTION (NR) EASILY ADJUSTABLE: The overall
> >> level of noise reduction can now be set using the knob
> >> above the NR switch (AF/RF-SQL). When NR is turned on,
> >> the present setting will be displayed on VFO B for
> about
> >> 2 seconds. To select a new setting, rotate the knob
> >> before the display times out. The setting is
> independent
> >> for CW and voice modes. Note: The range of this
> parameter
> >> is 0-10, corresponding to the “mix” or “M” parameter
> of
> >> the RX NR menu entry. See below.
> >> 
> >> * RX NR MENU ENTRY CHANGES: The RX NR menu entry can
> be
> >> used to adjust all three NR parameters (B=beta,
> D=decay,
> >> M=wet/dry mix). The M parameter now has a range of
> 0-10,
> >> matching the range available when the knob above the
> NR
> >> switch is used (see above). As before, all parameters
> can
> >> be adjusted separately for CW and voice modes. In most
> >> cases the factory default settings can be used for
> beta
> >> and decay, and the mix adjusted for the desired
> overall
> >> amount of NR using the knob (without using the menu).
> You
> >> can also now reset all NR parameters to factory
> defaults
> >> by holding CLR.
> >> 
> >> * DVR PLAY/REPEAT FIX: DVR play no longer drops
> messages.
> >
>
______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >> 
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list:
> >> http://www.qsl.net/donate.html
> > 
> >
>
---------------------------------------------------------------------
> > Web mail provided by NuNet, Inc. The Premier National
> provider.
> > http://www.nni.com/
> >
>
______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list:
> http://www.qsl.net/donate.html

---------------------------------------------------------------------
Web mail provided by NuNet, Inc. The Premier National provider.
http://www.nni.com/