[Elecraft] [P3][K3][KRX3] Viewing cursors for both receivers on P3

[Eduardo González]

Turn on VFO B menu item of P3

Edu YY4GMJ

On Fri, Sep 28, 2012 at 8:11 AM, Dale Boresz <dmb at lightstream.net> wrote:
> When using the second receiver w/ the K3 and P3, is there a way to have
> a second cursor representing the frequency of the 2nd rx on the P3?
> Currently the  only way I have been able to get this to work is to
> engage "Split", but my goal is to be able to tune around the same band
> with the second rx  (within the current passband of the P3) while
> listening to a station on the main RX, and be able to view both VFO's on
> the P3 -- while not being in 'split' mode.
>
> 73, Dale
> WA8SRA
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html