[Elecraft] [P3][K3][KRX3] Viewing cursors for both receivers on P3

[Mike K2MK]

Hi Dale,

I always see the VFO-B cursor on my P3. VFO-A is green, VFO-B is magenta,
and when in split, the actual transmit frequency is in red. If you don't see
the magenta cursor then you may have the VFO-B cursor turned off. Press the
P3 menu button and turn the knob until you see VFO B. Press the knob and the
cursor should appear.

A secondary problem might be that VFO-B is tuned too far away from VFO-A to
still be on the screen. When that happens you will see a magenta arrow
pointing in the direction of VFO-B. You might be able to make it visible by
increasing the frequency scale of the P3. 

73,
Mike K2MK



Dale Boresz wrote
> When using the second receiver w/ the K3 and P3, is there a way to have 
> a second cursor representing the frequency of the 2nd rx on the P3?  
> Currently the  only way I have been able to get this to work is to 
> engage "Split", but my goal is to be able to tune around the same band 
> with the second rx  (within the current passband of the P3) while 
> listening to a station on the main RX, and be able to view both VFO's on 
> the P3 -- while not being in 'split' mode.
> 
> 73, Dale
> WA8SRA





--
View this message in context: http://elecraft.365791.n2.nabble.com/P3-K3-KRX3-Viewing-cursors-for-both-receivers-on-P3-tp7563384p7563388.html
Sent from the Elecraft mailing list archive at Nabble.com.