[Elecraft] K3 RTTY ?

[Mike K2MK]

Hi Joe,

Split works the same as with CW or SSB. But if you are seeing SPL N/A on the
lower display it is because VFO-B is not set to the same mode as VFO-A. This
is easily resolved by first pressing the A/B button twice. By doing so you
will copy relevant information such as mode from VFO-A to VFO-B. Then when
you hold the SPLIT button you will be transmitting in AFSK A mode on
whatever frequency is displayed in the VFO-B window.

If you have a P3 you can see your separate transmit frequency and you can
move it around for a clear spot or to jump on a previously occupied
frequency as needed.

If you also have the dual receiver option your computer software might have
the capability of displaying a decode window for VFO-B. This feature is
called CLONE by MMTTY software (and its plug-ins for WriteLog and others).
It is necessary to tell the clone window that the audio for the VFO-B decode
window is coming in on the right stereo channel.

73,
Mike K2MK



Joe K2UF wrote
> Just started playing with RTTY.  How can I operate split using AFSK A
> mode?
> Any help?
> 
> Joe K2UF





--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-RTTY-tp7563219p7563225.html
Sent from the Elecraft mailing list archive at Nabble.com.