[Elecraft] I/O output level

[Don Wilhelm]

There will be some latency - so you have "double latency" - once through 
the KX3 and again through the panadapter software.  That may or may not 
be troublesome.  If so, the only cure is another soundcard and the cable 
to the headphone jack (and mic jack)

You will likely want to use that 2nd sound card (one for the panadapter 
the other for digital modes), because the KX3 has no provision for 
transmit using the I/Q signals - to transmit, one needs to inject the 
tones into the microphone jack, so just accept that fact and add the 
path from the headphone jack to the soundcard as well.

The "listen through" is nice because it does provide a 2nd receiver 
function for CW and SSB modes, and the frequency separation can be 
greater than the KX3 dual watch limitations.

73,
Don W3FPR

On 9/16/2012 5:25 PM, F5LCI wrote:
> Don,
> Thanks again for your help.
> I finally got the trick in the NaP3 setup :
> I had a wrong option in "system output" till I saw there the help box
> "listen through".
> No more need of the analog audio cable (and all it carries) ?
> - Not exactly for the moment, as the audio throughput is still different
>   from what I can hear with the KX3 loudspeaker.
> Maybe I have to dig deeper....
>
> 72 de FO/F5LCI
>