[Elecraft] K3 Mufflied audio - new issue
Keith Heimbold
ag6az at hotmail.com
Mon Sep 3 01:30:47 EDT 2012
Hi Don,
I am hearing a muffled echo and some strange over compression with my normal settings in monitor.
A local friend and I were changing the settings to lower compression and mic gain and it was better but it still remained.
I changed to the other rig using the same antenna and headset (used on other rig) and my report was beautiful sounding audio with no muffling or issues with echo.
I am working through a complete reset now to factory. Thought it might help.
I will report back if this helps the situation.
Thanks,
Keith
AG6AZ
Sent from my iPhone please excuse typos
On Sep 2, 2012, at 10:09 PM, "Don Wilhelm" <w3fpr at embarqmail.com> wrote:
> Keith,
>
> You mention 2 K3s, so that brings up the question of "what are you listening to".
> There is a difference if you are listening to K3#1 while transmitting on K3#2, compared with listening on either K3 while listening to the TX monitor.
>
> Please tell us whether what you are hearing is the result of your own TX monitoring or if that is the result orf a proper signal transmitted over the air (into a dummy load for consistency..
>
> 73,
> Don W3FPR
>
> On 9/2/2012 11:57 PM, Ham Radio wrote:
>> I was operating tonight after some fun this weekend working some nice DX since conditions were so great. I decided for some reason to listen to my audio on my K3 serial 1391 and it sounded really muffled. I switched to my other K3 and everything sounded perfect with same two headsets switching back and forth. There seems to be something weird going on with 1391. I am not sure if I should do a reset or if there is some other procedure I should run through. Using the headsets on 1526 eliminates the possibility of a headset issue.
>>
>> The audio sounds somewhat clear but with a muffled background noise which is difficult to describe. Usually my audio is super crisp and clean (that is what people tell me). Not sure what has transpired. I was considering doing a reset but thought might be a little extreme.
>>
>> Any help would be very much appreciated.
>>
>> Thanks,
>>
>> Keith
>> AG6AZ
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
More information about the Elecraft
mailing list