[Elecraft] K3 Mufflied audio - new issue

[Don Wilhelm]

Keith,

You mention 2 K3s, so that brings up the question of "what are you 
listening to".
There is a difference if you are listening to K3#1 while transmitting on 
K3#2, compared with listening on either K3 while listening to the TX 
monitor.

Please tell us whether what you are hearing is the result of your own TX 
monitoring or if that is the result orf a proper signal transmitted over 
the air (into a dummy load for consistency..

73,
Don W3FPR

On 9/2/2012 11:57 PM, Ham Radio wrote:
> I was operating tonight after some fun this weekend working some nice DX since conditions were so great. I decided for some reason to listen to my audio on my K3 serial 1391 and it sounded really muffled.  I switched to my other K3 and everything sounded perfect with same two headsets switching back and forth.  There seems to be something weird going on with 1391.  I am not sure if I should do a reset or if there is some other procedure I should run through.  Using the headsets on 1526 eliminates the possibility of a headset issue.
>
> The audio sounds somewhat clear but with a muffled background noise which is difficult to describe.  Usually my audio is super crisp and clean (that is what people tell me).  Not sure what has transpired.  I was considering doing a reset but thought might be a little extreme.
>
> Any help would be very much appreciated.
>
> Thanks,
>
> Keith
> AG6AZ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>