[Elecraft] K3 DNR

[Gary Gregory]

*Frank,

Tap to turn on NR and turn off NR

Whether NR is on or off, a HOLD (1 sec) the NR will bring up adjustment,
variable via VFO B

There is no current facility to change the setting by SAVING it to a PF key
which was the original inquiry.

 I have not had a Yaesu in my shack since I discarded the FTdx9000D and I
thought that enough time had passed that Yaesu would have fixed that issue,
but, apparently not?

I have never found a need to do this as I have had the K3 long enough to
get all my settings right. If a transceiver needs to have this adjusted
continuously during qso's then I sure don't one of those.  :-)

YMMV

73
*
On 3 September 2012 08:23, W6NEK <w6nek at socal.rr.com> wrote:

> Gary,
> As I understand it, just a TAP of the NR button will toggle the NR
> function On and Off.
> TAP & HOLD will place the NR into adjustment mode so the NR profile can be
> changed.
> Fred asked: "is there a way to continuously adjust the DNR from the very
> lowest to the most aggressive with a dial while listing"?
> As far as I know NR TAP & HOLD (NR ADJ) is the only way to accomplish what
> he wants.
>
> Is there an easier way that I missed?
> 73... Frank - W6NEK
>
> ----- Original Message -----
>   From: Gary Gregory
>   To: W6NEK
>   Cc: elecraft at mailman.qth.net
>   Sent: Sunday, September 02, 2012 2:28 PM
>   Subject: Re: [Elecraft] K3 DNR
>
>
>   Fred,
>
>   Just a TAP of the NR is all that is needed. No need to HOLD
>
>   73
>
>
>   On 3 September 2012 02:57, W6NEK <w6nek at socal.rr.com> wrote:
>
>     Hi Fred,
>     I agree that the 15 step DNR control on the FT5000 is a very useful and
>     effective function.  To gain access to the K3 NR settings you need to
> press
>     and hold the NR button (NR ADJ).  The settings will appear in the VFO B
>     portion of the display.  There are a total of 32 noise reduction steps
> with
>     the first 16 tailored to CW mode (F1-1 thru F4-4) and the remaining 16
>     tailored for SSB mode (F5-1 thru F8-4).  While not as convenient as the
>     variable NR setting on the FT5000, it's just as effective.  You can
> read all
>     about it on page 25 of the Operating Manual.
>
>     73,
>     Frank - W6NEK
>
>     ----- Original Message -----
>     From: "Fred Smith" <mfsj at mo-net.com>
>     To: <elecraft at mailman.qth.net>
>     Sent: Sunday, September 02, 2012 2:39 AM
>     Subject: [Elecraft] K3 DNR
>
>
>     <SNIP>
>     > Being rather new to Elecraft I have only had my K3's for about a
> month I'm
>     > still searching for a way to continuously adjust the DNR from the
> very
>     > lowest to the most aggressive with a dial while listing. I'm able to
> do
>     > this
>     > with my FTDX-5000 and find it to be one of my most used features and
> most
>     > effective I might add with that ability.
>     >
>     >
>     >
>     > Is there a way for me to setup a knob to adjust the DNR like that in
> the
>     > K3,
>     > I'm sure there must be and it's just me not finding it, that good of
> a
>     > feature I'm sure would not be left out.
>     > >
>     > Thx to all & 73,
>     >  Fred/N0AZZ
>
>     ______________________________________________________________
>     Elecraft mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/elecraft
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:Elecraft at mailman.qth.net
>
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
>   --
>   Gary
>   Start the day off slow, then taper off.........
>   K3 #679
>   KPA500FT #18
>   KAT500FT 007
>   P3 #1629
>
>
>   No virus found in this message.
>   Checked by AVG - www.avg.com
>   Version: 2012.0.2197 / Virus Database: 2437/5242 - Release Date: 09/02/12
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
*Gary*
*Start the day off slow, then taper off.........*
K3 #679
KPA500FT #18
KAT500FT 007
P3 #1629