[Elecraft] K3 Parts transfer between rigs

[Keith Heimbold]

Thanks for pointing that out. I will confer with my friend to see if he missed some of these steps or not.  I am waiting to hear back from him.

Keith
AG6AZ

Sent from my iPhone please excuse typos

On Oct 19, 2012, at 8:09 AM, "Mike K2MK" <k2mk at comcast.net> wrote:

> Hi Keith,
> 
> You should review the KRX3 assembly/installation manual. There's a resistor
> that may need to be modified (see page 21) and maybe some other stuff as
> well. 
> 
> 73,
> Mike K2MK
> 
> 
> Keith Heimbold wrote
>> I have sent my Elmer tech friend a couple emails asking him if he swapped
>> out the other boards. If he did not, we will have to get that done and see
>> if the errors are eradicated. This is a set back for sure but it gives me
>> an opportunity to better understand the K3 and its component parts. 
>> 
>> I will also contact tech support to see what is going on with the error
>> codes. It appears that I also received a ERR DVR error code to top it off
>> after I sent the email to the reflector.
>> 
>> Keith
>> AG6AZ
>> 
>> Sent from my iPhone please excuse typos
>> 
>> On Oct 19, 2012, at 5:07 AM, "Don Wilhelm" &lt;
> 
>> w3fpr@
> 
>> &gt; wrote:
>> 
>>> Was the DSP2 board and the synthesizer board for the KRX3 transferred
>>> from the other K3.  From the errors you are getting, it would seem that
>>> they were not.
>>> 
>>> Did your tech elmer just do the unplugging/replugging job or did he check
>>> the result out after each option was transferred?  What did he say when
>>> you asked him for his observations.
>>> 
>>> You may have to contact Elecraft support with your error codes.
>>> 
>>> 73,
>>> Don W3FPR
> 
> 
> 
> 
> 
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-Parts-transfer-between-rigs-tp7564314p7564329.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html