[Elecraft] No CW decode on K3 or P3

[Matt Zilmer]

Make sure you have TEXT DEC enabled.  Narrow the bandwidth, set THR to
2 or so, 30-90 WPM.  

My notes here say it was working fine on 4.51 / 1.17.

73,
matt W6NIA


On Sat, 24 Nov 2012 09:50:06 -0500, you wrote:

>
>Im in the CQ WW and some are just sending at bullet speed have noticed K3 and P3 are not decoding anything. On the K3 just the VFO freq is displayed it does not even attempt to show code. I have the test dec set to 30-90 (have tried other settings) and threshold has tried all as well. Is there a setting in the K3 were I shut down the decode?? Firmware is 4.51 on K3 and on P3 1.17
>Mike
>VE3WDM
> 		 	   		  
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html